 |
 Step 1: Prepare to remove bumper coverStart by removing the upper grill. Push down on the retaining clips as shown.
|
|
|
 Step 2There are two lower retaining clips down below. Use a long screwdriver to release them.
|
|
|
 Step 3: Remove the grill
|
|
|
 Step 4: Remove bumper cover push clips.
|
|
|
 Step 5: Remove filler panelThere is a push clip on the backside.
|
|
|
 Step 6: Remove headlampYou need to gain access to a clip behind the light.
|
|
|
 Step 7: Unclip the headlamp bulb socket.
|
|
|
 Step 8: Remove push clipThe clip is behind the headlight.
|
|
|
 Step 9: Remove driving lampsUnclip the bulb socket, too.
|
|
|
 Step 10: Remove push clipIt's hidden in the bumper scoop vent.
|
|
|
 Step 11: More push clipsRemove the push clip located in the lower center of the bumper.
|
|
|
 Step 12: Remove fender well plastic screw
|
|
|
 Step 13: Remove fender well push clipRemove the clip located behind the fender well splash shield.
|
|
|
 Step 14: Remove bumper cover
|
|
|
 Step 15: Install Grillcraft grillPlace the grille into the bumper opening and mark the mounting tab center hole.
|
|
|
 Step 16: Drill mounting holesUsing a 3/16 drill bit drill for mounting screws.
|
|
|
 Step 17: Attach mounting clipsInstall supplied "U" Nuts onto mounting tabs as shown.
|
|
|
 Step 18: Fasten mounting screwsFasten the mounting screws from the backside. Reinstall bumper.
|
|
|
 Done!
|
|
