|Home > Brakes > Rear Brembo Adapter Kit (02-05 WRX)|
Rear Brembo Adapter Kit (02-05 WRX)
This kit allows you to bolt STi Brembo rear calipers to your WRX. You get two custom-made caliper brackets, hardware, and special DBA rear rotors that have the OUTSIDE diameter (316mm) of the STi Brembo rotors, but the INSIDE diameter of the WRX parking brake. (Note that you CANNOT use the original WRX STi rotor, because then your smaller-diameter WRX parking brake will not reach the rotor.)
You supply the STi rear calipers and brake pads (or buy the pads from us). You'll have to bend or remove the rear dust shield to clear the new rotor.
06-07 WRX models have a different rear backing plate, so they don't need the caliper mounting brackets to bolt the STi calipers on; they just need the rotors, available separately HERE.
Kit includes two rear brake rotors, two caliper mounting brackets, and hardware. Fits all 2002-05 WRX, and 2005+ Legacy GT, 2002+ Forester XT.
Note that these parts are for BREMBO calipers ONLY. If you are trying to fit Subaru two-piston rear calipers, you'll want these adapters.
Some installation details: You'll have to chop/drill/snip off or bend your factory dust/splash shields; they're too small for the new much larger rotors. Also, if you have a Legacy, the rear spindle will have to be clearanced using a Dremel or other grinding tool to make room for the caliper bolts.
|Rear Brembo DBA Slotted Adapter Kit (02-05 WRX)Includes adapters AND rotors.|
|Rear Brembo Adapters ONLY (no rotors)Note: You MUST have the special adapter rotors for these to work! If you don't, please buy the kit above.|
|Rear Brembo Adapter Bolt Kit (02-05 WRX)Set of four special bolts for this kit. (In case you lost or need to replace some...)|