Bolt-on Wheel Spacer Kit (longer studs NOT required!)

  • These spacers cost a little more than the standard wafer type, but the difference is that they come with their own captive studs, so you don't have to take apart your hubs or press in new longer studs. Plus, if you ever want to take the spacers off, your original short studs are right where they always were. They are hubcentric to both the car and the wheel, too. Available in 5x100 or 5x114 bolt patterns, in 15mm, 20mm, or 25mm thickness.

    Kit includes four spacers, and 20 special low-profile lug nuts. Note that the 15mm spacers, and sometimes the 20mm ones, are thin enough that the stock studs will poke through -- you will need wheels that have cavities in the back to allow for the stud length, or trim the extra length off the studs. On the 15mm spacers, the lug nuts themselves will protrude out past the surface of the spacer, so the wheel must have room to clear them. (See photos.)

    Note: Wheel spacers that have been bolted to a car CANNOT be returned.

    Set of FOUR spacers.

  • SKU#: 08104A15, 08104A20, 08104A25, 08104B15, 08104B20, 08104B25

    Shipping Weight: 10.0 lb

    Manufacturer: Mach V Motorsports

    Category: Wheel Accessories