+Filter Parts By Car
+Subaru Performance Guide
Gauge Accessories
52mm Gauge Blank
Why hasn't anyone come up with this before? This little plastic blank snaps into any 52mm gauge cup or mount. The raised outer ring and textured face give it a...
60-to-52mm Step-Down Adapters
This adapter will allow you to install a 52mm gauge into a 60mm gauge mount. Black rubber construction. Sold as a set of two.
Add-a-Circuit With Fuse
This part is extremely helpful for adding gauges or other electronics to your car. Just select a circuit and remove the existing fuse. Replace the fuse with the Add-a-Circuit harness,...
Billet Water Temp Adapter
This adapter allows the placement of a water temperature sensor inline in your stock radiator hose. Just cut a section out of the hose, insert the adapter, and you're ready...
Fluid Fitting Adapter Set
This five-piece fitting set allows you to adapt a standard 1/8" NPT fluid temp/pressure probe to almost any import car hole. The set includes adapters in the following sizes: M16...
Fuel Pressure Sender T-Fitting Adapter
Install your fuel pressure sender with ease using our adapter that can quickly can be installed into any rubber fuel line. This can also be used for oil cooler lines...
Killer B 1/2 NPT to 1/8 PT Adapter
The Killer B 1/2NPT to 1/8PT Adapter will allow the use of aftermarket temperature sensors that have 1/8PT threads. The Killer B aftermarket oil pan includes an extra 1/2NPT port...
Killer B Dual Oil Sender Adapter 2015+ WRX/2014+ Forester XT
The Killer B Motorsport Dual Oil Sender Adapter was designed for the 2015+ WRX and 2014+ Forester XT models that use the latest turbo FA20 engine. Product Features: Allows the...
Oil Filter Sandwich Adapter
This sandwich adapter allows you to easily mount oil temperature and/or pressure probes to your Subaru. Simple bolt it between your oil filter and the filter mount. Comes with a...
Oil Gallery Plug
There's this great spot on the top of the Subaru engine block that has a plug in it. That plug gives you access to the oil gallery (or galley, if...
Prosport Dual Post Oil Press Sending Unit
Dual Post Oil Pressure sender (VDO type). 3-160 oHms 0-10 BAR 0-150 PSI 1/8"NPT thread
Prosport EGT Probe
6 Foot braided stainless steel lead 1/8"NPT threaded fitting Plugs directly into any Prosport EGT gauge.
Prosport Electric Boost Gauge Sensor
Works with all electrical Prosport boost gauges, including peak/hold models.
Prosport Evo Temp Sender
Fluid temp sender for Prosport Evo, clear lens Performance series, and 60mm Performance series (only).
Prosport Fluid Temperature Sender
Can be used for either water, engine oil or transmission fluid. Fits all Prosport fluid temp gauges except Evo series gauges, clear lens Performance series gauges, and 60mm Performance series...
Prosport Fuel Pressure Sending Unit
Dual Post Fuel Pressure sender (VDO type).
Prosport HUD Replacement Tint
If you need to move your Prosport HUD gauge display to a different car, or if you have to replace the tint film for some other reason, we stock extras....
Prosport Premium Oil/Fuel Pressure Sender
This can be used for either a Premium Series Oil Pressure or Premium Series Fuel Pressure gauge
Prosport Warning Light
This warning lamp attaches to any Prosport Premium Series gauge. Installs in seconds! It duplicates the warning lamp on the face of the gauge -- great if you've disabled the...
Prosport Waterproof Boost Gauge Sender
This Prosport boost gauge sender is completely waterproof. It is compatible with all Prosport electric boost gauges, including JDM, Evo, and Halo series gauges. Be sure to use an in-line filter...
Remote Oil Pressure Sending Kit
Mounting an oil pressure sender directly on the engine can be difficult because of the size of the sender. This kit eliminates that problem by allowing you to mount the...
Contact Information
| Mach V Motorsports 45690 Elmwood Court, Suite 170 Sterling, Virginia, 20166 (571) 434-8333 |
Hours (Eastern time) M-F 9:30 am - 5:30 pm Sat. 12 noon - 3 pm, usually
|
Our Services
© 2018 FastWRX.com.
