Our own Subaru-fitment 10mm wheel spacers. Precision CNC-machined aluminum spacers, 10mm thick, with the perfect 56.1mm Subaru centerbore on both sides. Dual drilled, so they will fit any late-model Subaru. Get these if you already have extended wheel studs, which are REQUIRED. (If you want to buy the spacers WITH extended wheel studs, we sell that package over HERE.)
NOTE: The Mach V 10mm spacer kit is very tight in terms of clearance from the inside of the car hub to the inside of the spacer -- this is necessary because of the geometry of making a 10mm spacer. You MUST test-fit the spacer on the car to make sure there is clearance. Rotor hats do vary in thickness; if you have an extra-thin rotor hat, the hub may poke out higher than the depth of the wheel spacer. In that case, you will need to remove some material from the hub in order for the spacer to sit down flat on the rotor hat. We will not accept returns if the spacer is damaged by a protruding hub.
Set of TWO spacers.
Wheel spacers that have been installed on a car -- even once -- MAY NOT BE RETURNED.