18x8.5 5x114 5x114x
bolt,
Compatible with car:
18x8.5 5x114 5x114x
bolt,
This BBS-made forged OEM Subaru wheel was an upgrade for the 2008-2014 model years of the Subaru WRX STI. The 18 x 8.5" wheel looks light and airy, and it is light at 20.5 pounds, but the forged construction means it is extremely strong. We would recommend a 245/40R18 tire on this wheel, for most applications.
This wheel will clear all OEM Subaru brakes, including 4-pot STI Brembo brakes, and even the 2018+ STI 6-piston STI Brembos.
+55 offset, hubcentric for Subaru cars (duh). Center cap not included; sold separately. This is a NEW, never used product; this is NOT a refurbished wheel.
Priced per wheel. Choose from silver, Hyper Silver, or gold color.
Note: Because of the large size and the nature of the product, there are NO returns on wheel purchases. MAKE SURE your wheel SIZE, BOLT PATTERN, and OFFSET are correct before ordering!
Also please be aware these are scarce and somewhat difficult for us to get. Be prepared for a 2-3 week lead time before these will ship.
SKU#: 11051SI, 11051HS, 11051GO
Shipping Weight: 35.0 lb
Supplier: Subaru
Category: Wheels, Winter Wheels for 2018+ WRX STI
After lifting my 2016 Subaru Crosstrek, and adding new aggressive wheels and tires, the nonexistent exhaust sound didn’t match the vehicle. I ordered the 5” Nameless exhaust and it is the perfect mod. The sound is deep without being loud or obnoxious. The install is simple, remove the two bolts from the exhaust flange (this may take some muscle, grab some rust remover to help loosen). Then add a little dish soap onto the metal pegs, and they will slide right out of the rubber. Then reverse the process. Great exhaust, made to order, in the USA out of high-quality, rust resistant steel. Cheers!!
Axleback Exhaust - 2013-2017 Crosstrek XV - 5" Muffler - Single Exit - 3" Double Wall Tip
Getting the OEM exhaust out was the hardest part. Bolts were a little rusty and on there tight. Once it was out installing the Nameless took maybe 10-15 minutes at most. And I don't usually wrench on my cars lol
Axleback Exhaust - 2017+ Impreza Wagon/2018+ Crosstrek - Executive 5" Muffler
Easy install on the exhaust. I have an etrailer.com branded hitch mount and the axle back 10” executive exhaust just fits. I would consider clearancing the metals hangers by 1/4” but only if vibration or heat becomes an issue. So far however, so good. The cold start vs idle sound is significant- it’s fairly quiet at idle once the car warms up. The strut tower brace was easy to install but I highly recommend checking the recommended tools shown on Nameless’ YouTube channel. The u-joint and 1/4” sockets are absolutely to clear the wiper shroud.
Axleback Exhaust - 2017+ Impreza Wagon/2018+ Crosstrek - Executive 5" Muffler, Strut Tower Brace - '17+ Impreza Wagon '18+ Subaru Crosstrek